Back To Top
DeltaV™ CTO Cabinets
PDP_DeltaV CTO Cabinets
The DeltaV™ Configure To Order (CTO) Cabinets provide a predesigned solution for DeltaV CHARM I/O system, assembled in industry standard cabinets, ready to be installed on-site and connected to the field I/O.
These cabinets are designed to meet CSA and CE personal safety requirements to help facilitate site installation and inspection. They seamlessly integrate into the overall hardware solution of your DeltaV project.
DeltaV™ CTO Cabinets

Specs

Dimensions
Charms and Controller Enclosures:
800mm (W) x 2000mm (H) (+100mm plinth) x 600mm (D)
800mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)

Traditional IO Enclosures:
800mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)
1200mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)
1600mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)

Data Enclosures:
800mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)
800mm (W) x 2000mm (H) (+100mm plinth) x 1000mm (D)
800mm (W) x 2000mm (H) x 1200mm (D)
Access
Front Access –Single Door, Right Hand Hinged, Push Button and Lock Insert
Front and Rear Access – Single Door on Front and Rear, Right Hand Hinged, Push Button and Lock Insert
Front and Rear Access –Double Door on Front and Rear, Push Button and Lock Insert
Protection Category
IP 54 – Type 12
Weight
~200 kg (may vary as per hardware added by option selection)
Material
Enclosure Frame : Sheet Steel, 1.5 mm, Dipcoat-primed,
Door: Sheet Steel, 2 mm, Dipcoat-primed, Powder-coated on the Outside, Textured Paint,
Color: RAL 7035, Plinth RAL 9005
Door fans
Continuous run or with thermostat control
Cable entry
Bottom
Power Requirements
Internal Power Distribution
Redundant distribution through Main Switch:
100-120 VAC 50/60 Hz
220-240 VAC 50/60 Hz
24 V DC

Configured with one of the following internal power supply systems:
2 x 20A and full redundant (primary and secondary) 24 VDC distribution
2 x 40A and full redundant (primary and secondary) 24 VDC distribution
Control Network
Redundant Copper (RJ45)
IO Count / Type
DeltaV DCS Charms Encosures:
Up to 504 IO AC powered CIOC
Up to 576 IO DC powered CIOC

Controller Encosures:
Up to 288 CHARMS IO
DCS - CIOC with Non IS, IS IO Charms
SIS-CSLS with Non IS, IS IO Charms

Traditional IO DCS Encosures:
M Series DeltaV Conventioal IO Hardware
S Series DeltaV Conventioal IO Hardware
Non IS Traditional IO Cards

Date Enclosures:
Network Enclosure
Server/ Network Enclosure
Name Plate
Name Plate Holder with Nameplate Insert
Environmental Specification
Indoor installation
Equipment Room - HVAC Controlled, Recommended temperature 25° C
IT Room- Recommended temperature 20° C
Relative humidity
5-95% (non-condensing)
Globally Certified
Europe: CE
North America: Ordinary Location

Features

  • Delivers Electronic Marshalling enabled by CHARMs technology or controller cabinet for CHARM system
  • Fast delivery
  • Reduced system footprint
  • Significantly reduce cabinet design engineering
  • Fully documented package