This product is now obsolete.
Relevant documents and drawings are listed below.
Contact your local Emerson representative for your measurement needs.
Contact your local Emerson representative for your measurement needs.
Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.
Roxar™ Subsea Sand Monitors (Obsolete)
Roxar™ Subsea Sand Monitors (Obsolete)
Specs
Accuracy
Up to 95% depending on flow regimes and calibration level
Repeatability
Better than 1%
Flow velocity
Minimum 1 m/s
Particle detection limit
In liquid: Greater than 25 µm depending on factors such as flow rate and viscosity
In gas: Greater than 15 µm depending on factors such as flow rate and viscosity
In gas: Greater than 15 µm depending on factors such as flow rate and viscosity
Pipe Surface Temperature
-40 °F to 437 °F (-40 °C to 225 °C)
Ambient Temperature Range
0 °F to 158 °F (-18 °C to 70 °C)
Material sensor body
UNS S31803 Duplex
Output
4-20mA, ModBus RS-485, CANbus SIIS Level 2
Electrical Interface
4/ 7/ 12 way
Water Depth
10000 ft (3000 m)
Features
- Acoustic based sensor provides an immediate response to the onset of sand production.
- Compact, robust design provides easy installation and retrieval on the outside of the subsea production pipe-work.
- ROV retrievable and Non-retrievable models are available, both mounted in fixed pre-installed clamps with guide funnels.
- Can be used with Roxar Sand Erosion Sensors to positively confirm the occurrence and severity of a sand event, giving operators complete control over sand production.
- Connect to Roxar Fieldwatch monitoring software for in-depth analysis and investigation of process changes.